R&D and custom development

From a technical idea to a working product

We carry out full-cycle research and development: we study the task, design, calculate, issue documentation, build a prototype, test and commission it. Mechanics, electronics and software in one team.

200+projects completed since 2019
30+customers
2011the team's specialists have worked together since
2030horizon of current R&D programmes
When it is needed

No ready-made solution — so it has to be created

Customers come to us with tasks for which equipment cannot simply be bought from a catalogue. We take such a task in full and are responsible for the result — from the first calculations to the product operating on site.

Our developments operate on the seabed, on uninhabited islands, on offshore platforms and at restricted production facilities, so we design equipment with an understanding of how it will be serviced five years from now.

  • the required equipment is not on the market
  • the imported equivalent is unavailable or left without service
  • standard equipment cannot withstand the conditions: pressure, corrosion, frost
  • a manual operation needs to be automated
  • a technical idea must be proven on a prototype before series production
  • an existing product requires deep modernisation
What we develop

Six areas of development

01

Subsea equipment and tooling

Skids and tooling for work-class ROVs and divers: tooling skids, hydraulic inspection manipulators, a deep-water line laser tested under external pressure, a subsea inclinometer, water-jetting pumps, cutters. In 2023–2025 we went from concept design to detailed design documentation for a tooling package for a Russian subsea complex.

ROV tooling ↗
02

Robotics and remote tooling for high-precision manufacturing

For high-tech manufacturers we develop design documentation for remote tooling, manipulators and robots and manufacture special fixtures. This work includes robotic systems for inspection and remote operations inside pipelines that people cannot access.

Reverse engineering ↗
03

Measuring systems and instruments

The CODE-H water-level monitoring system with automated level stations, a monitoring and control unit, the ASVP sound velocity measurement system with ±0.05 m/s accuracy, and a pilot optoelectronic product inspection system. We develop sensors, communication links, power supply and the server side as one system.

CODE-H monitoring system ↗
04

Software and artificial intelligence

Control software for automated assembly stations and lines, including commissioning and testing. Neural networks for pipe flaw detection, machine vision for industrial and subsea cameras, embedded software for controllers and instruments (C/C++, UART, SPI, I²C, CAN, RS-232/485), client-server telemetry systems and operator workstations.

Software ↗
05

Industrial electronics

Our own AMAXA interface converters for connecting RS-232/422/485 devices to Ethernet. We develop control units, sensors and boards, including replacements for imported ones.

Industrial solutions ↗
06

Non-standard structures and tooling

A drone carrying system for a production vehicle, a transport frame for marine buoys, tooling for subsea measurements, assembly control of connecting spools for a subsea production system, support structures for vessel launch and recovery systems, deepwater electronics housings. They have one thing in common: no ready-made solution existed.

Engineering ↗
How the work is organised

R&D stages

01

Task and specification

We study the customer's process and operating conditions and define requirements and acceptance criteria.

02

Research and concept design

We work through options, choose the principal solution and assess risks and feasibility.

03

Calculations and modelling

Strength and stiffness analytically and by the finite element method; kinematics and ergonomics in CAD; corrosion resistance for subsea equipment.

04

Design documentation

We issue detailed documentation for mechanics and electronics and develop the software.

05

Prototype and testing

We build the prototype at our own production sites and at partner facilities, test it to a dedicated procedure and refine it.

06

Commissioning and support

On-site commissioning, installation supervision, training, warranty and further maintenance.

Result

What the customer receives

A product that works on site

Not a report for its own sake: the result of R&D is a tested unit brought into operation.

A documentation package

Design documentation, calculations, test procedures and results — the basis for series production and service in Russia.

Mechanics, electronics and software from one contractor

No need to coordinate three suppliers: the structure, the board and the program are designed by one team.

Responsibility after handover

We maintain the level stations we supply and commission on the line the software we write. Maintenance contracts have been renewed every year since 2020.

Examples

Amaringo's own developments

Products created in-house — from specification to series unit.

Engineering capabilities

What we work with

  • Calculations. Analytical verification calculations and the finite element method; load cases and regulatory requirements are defined by the project.
  • Design. CAD systems to assess kinematics, strength, ergonomics and appearance before manufacturing.
  • Materials. Corrosion-resistant and structural steels, aluminium alloys, engineering plastics and composites.
  • Manufacturing. Two production sites of our own plus partner facilities: welding and assembly, conventional and CNC machining, laser cutting, bending, polymer processing.
  • Programming. C and C++, Python, embedded systems on microcontrollers, RTOS and embedded Linux, server and web applications.
  • Data. Numerical modelling, processing of measurement results, training and validation of neural network models on independent datasets.
  • Field practice. Our specialists have worked offshore, in ports and on expeditions in the Okhotsk, Baltic, Kara, Black and Caspian seas.
  • Adjacent disciplines. Experience of working with hydrographers, surveyors, geologists, geophysicists, divers and ROV pilots.
Questions and answers

R&D and custom development

Does Amaringo carry out full-cycle R&D?

Yes. The company runs the work from specification to commissioning: research, concept design, calculations, design documentation, prototype, testing, commissioning and support.

In which fields does Amaringo develop products?

Subsea equipment and ROV tooling, robotics and remote tooling for high-tech manufacturing, measuring and monitoring systems, software and neural networks, industrial electronics, non-standard structures and tooling.

Do you develop electronics and software as well as mechanics?

Yes. Mechanics, electronics and software are designed by one team: from boards and embedded software to control programs for automated lines and server-side data collection systems.

Do you have experience with high-tech and restricted production facilities?

Yes. For high-tech manufacturers Amaringo develops documentation for remote tooling, manipulators and robots, manufactures special fixtures and writes control software for automated assembly stations and lines.

Who manufactures the prototype?

Amaringo builds prototypes at its two own production sites and at partner facilities selected for the specific product. Assembly, inspection and testing remain the company's responsibility.

How long does R&D take and how much does it cost?

Duration and price depend on product complexity and the scope of testing and are fixed in the technical specification and schedule. For reference: the tooling package for a subsea complex went from concept design to detailed documentation in 2023–2025.

Where do I start?

Describe the task, operating conditions and desired result by email to info@amaringo.ru or by phone +7 (812) 426-09-62. This is enough for an initial assessment.

Tell us about your task — we will propose a solution