Engineering and IT · St Petersburg

Engineers who take a task through to a working product

Amaringo is a St Petersburg engineering and IT company. We design, manufacture, commission and maintain equipment for the sea, ports and the nuclear industry: from subsea tooling to software that controls production lines.

200+projects completed since 2019
30+customers
13level stations commissioned on one shipping canal in 2019–2024
5seas where our specialists have worked: Okhotsk, Baltic, Kara, Black and Caspian
2030horizon of current R&D programmes
About the company

We take the whole task

Customers rarely come to us for a standard solution. Typically the task sounds like this: the required equipment is not on the market, imported equipment is unavailable, and the work has to be done on the seabed, on an uninhabited island or inside a restricted production facility. We take such tasks in full: calculations, design documentation, manufacturing, testing, installation and support.

The team brings together specialists in systems engineering for marine, river and pipeline transport and nuclear power. They have worked offshore, in ports and on expeditions, so we design equipment with an understanding of how it will be operated.

2011

The team's specialists began working together

2019

Amaringo was established

Areas of work

What we do

01

Hydrological monitoring for ports and shipping canals

We produce automated water-level stations of our own design and the Code-H monitoring system that receives and stores their data. Stations are installed on berths, on piles in the water area, on uninhabited islands and on offshore platforms. For each site we decide separately how to mount the equipment and organise the data link.

On one shipping canal and the adjacent river section alone we commissioned 13 stations in 2019–2024. We then maintain them ourselves: seasonal installation work, check levelling and metrology. Ports need sea-level data every day — navigation safety depends on it.

In the same area we connect third-party stations to our system, modernise the light-optical equipment of shore navigation marks and develop detailed design documentation for marine terminals — for example, for a tide-gauge station and a laser docking system.

Code-H monitoring system ↗
02

Equipment for subsea engineering works

We develop and manufacture skids and tooling for work-class remotely operated vehicles and for divers. This is our contribution to import substitution offshore: what used to be purchased abroad we now make ourselves.

  • Tooling skids and frames that quickly reconfigure the vehicle for a specific job.
  • Hydraulic inspection manipulators with a pan-and-tilt platform for camera and lights.
  • A deep-water line laser tested under external pressure and a subsea inclinometer in two versions.
  • A high-capacity water-jetting pump, a pipeline inspection crawler and dredge pumps for diving works.
  • Tooling kits for one-off tasks: repair of protective structures on the seabed, anode installation, measurements inside a platform caisson.

Each product comes with its engineering package: strength calculations, corrosion-resistance calculations and test procedures. In 2023–2025 we went from concept design to detailed documentation for a tooling package for a Russian subsea complex.

Equipment catalogue ↗
03

Engineering and software for high-tech manufacturing

For nuclear-industry enterprises we develop design documentation for remote tooling, manipulators and robots and manufacture special fixtures. We also write control software for automated assembly stations and lines and take it through commissioning and testing.

Our most recent work includes neural networks for pipe flaw detection and a pilot optoelectronic product inspection system. Our R&D programmes are scheduled through 2030.

Software ↗
04

Surveys, data and field infrastructure

We take part in marine environmental engineering and hydrometeorological surveys in the Arctic and the Caspian, including support for surveys along future pipeline routes. Our staff have observed sea level, waves and currents on fixed platforms in the Okhotsk, Baltic, Kara, Black and Caspian seas.

We process the collected data ourselves: we apply numerical modelling and derive design, statistical and forecast characteristics. We also build geoinformation services for hydrometeorological and environmental data and deploy IT infrastructure where there is none — on vessels and in expedition camps.

Environment and monitoring ↗
05

Reverse engineering

We restore design documentation and reproduce parts, assemblies and instruments that have no drawings, spares or manufacturer support. We take tasks from any industry: the engineering approach is the same, only the product requirements change.

The work follows a full cycle: examination and measurement of the sample, 3D model, calculations, documentation package, manufacturing and testing. The customer receives a documented product that can be produced in series and serviced in Russia. If the original had weak points, we correct them.

Reverse engineering is needed wherever imported equipment has been left without supplies and service:

  • Medicine. Assemblies and spares for diagnostic, laboratory and sterilisation equipment.
  • Industrial equipment. Parts of machine tools and production lines, pumps, gearboxes, hydraulics, tooling.
  • Energy and oil and gas. Valves, compressor and drilling equipment assemblies, special tools.
  • Shipbuilding and marine equipment. Ship machinery, subsea equipment, spares for underwater vehicles.
  • Transport and special vehicles. Components for railway, road, mining and agricultural machinery.
  • Food and packaging industry. Wear parts and assemblies for filling and packing lines.
  • Electronics and automation. Replacement of control units, sensors and boards with our own designs.

For us this continues what we already do offshore, where we replace imported subsea equipment with products of our own design.

Engineering ↗
Reputation

Why customers trust us

Customers come back

Most customers appear in our project list more than once. With some partners we have completed more than a dozen projects, and maintenance contracts have been renewed every year since 2020. Any contractor can win a one-off supply; only one whose equipment works gets the sixth year in a row.

We stay responsible after handover

We maintain the stations we supply. We commission on the line the software we write. So already at the design stage we think about how the product will behave in five years.

We have our own developments

The Code-H monitoring system, inspection manipulators, subsea lasers and inclinometers were created in-house. We do not resell third-party products, which means we can adapt a product to the customer's site.

Non-standard tasks do not scare us

Our work includes a drone carrying system for a production vehicle, a transport frame for marine buoys, tooling for subsea measurements and assembly control of connecting spools for a subsea production system. They have one thing in common: no ready-made solution existed.

We work with demanding customers

They include state marine-transport enterprises, operators of offshore projects, design institutes, research centres and manufacturers of equipment for the nuclear industry. In their references they note the stable operation of our equipment, data quality, adherence to schedules and fast resolution of issues during development.

Questions and answers

The company in brief

What does Amaringo do?

Amaringo LLC is an engineering and IT company based in St Petersburg, Russia. It designs, manufactures, commissions and maintains equipment for the sea, ports and the nuclear industry: water-level stations and the CODE-H monitoring system, skids and tooling for ROVs and divers, software for automated production lines, and it carries out surveys and reverse engineering.

When was Amaringo founded and how many projects has it completed?

The company was established in 2019; its specialists have worked together since 2011. Since 2019 it has completed more than 200 projects for more than 30 customers.

Does Amaringo take on non-standard tasks?

Yes, this is its core specialisation. The company takes the whole task: calculations, design documentation, manufacturing, testing, installation and support — including cases where the required equipment is not on the market or imported equipment is unavailable.

What is reverse engineering and which industries does Amaringo serve?

Reverse engineering means restoring design documentation and reproducing parts, assemblies and instruments that have no drawings, spares or manufacturer support. Amaringo covers the full cycle: examination and measurement of the sample, 3D model, calculations, documentation package, manufacturing and testing. Industries: medicine, industrial equipment, energy and oil and gas, shipbuilding and marine equipment, transport and special vehicles, food and packaging, electronics and automation.

Does Amaringo maintain equipment after delivery?

Yes. All products are covered by warranty, and the company maintains the level stations it supplies: seasonal installation work, check levelling and metrology. Maintenance contracts have been renewed every year since 2020.

Where is Amaringo located and how can I get in touch?

Office: office 26N, 3A Konnogvardeysky Boulevard, St Petersburg, 190000, Russia. Phone +7 (812) 426-09-62, email info@amaringo.ru.