

Spot or line optical marker
The laser projects a visible green spot or line onto a subsea object. It is installed alongside a camera or other inspection equipment. The marker identifies an area in the image and can form part of an agreed optical scaling system.
The cylindrical housing facilitates mounting on a bracket or inspection frame. The design uses hard-anodised aluminium alloy and sapphire glass. A 110° angle is specified for the line version; other options are agreed when ordering.
Technical
specifications
Final configuration and operating conditions are agreed in the technical specification.
| Parameter | Value |
|---|---|
| Operating water temperature | −2…+35 °C |
| Permissible operating depth, m | 1000 |
| Length, mm | 240 |
| Diameter, mm | 54 |
| Green wavelength, nm | 520 – 532 |
| Laser module power, mW | 100 (up to 300 by agreement) |
| Beam projection type | Line, spot |
| Line projection angle | 110° (other options available) |
| Maximum mass, kg | 1,2 |
The laser alone does not determine distance or object size. Measurement requires calibration and an appropriate processing system.
From task
to operation.
Visual targeting
Marking a selected surface area in the inspection camera image.
Optical scaling
Operation in a calibrated system with defined laser and camera geometry.
Line projection
Highlighting a surface profile with a thin line as part of a measurement system.


